Long - term preventive protection
Liquid fungicide and insecticide concentrate for long-term wood protection against mildew, wood-destroying insects and fungi. Offers strong resistance against active substances being washed out of the wood due to weather conditions. Protects interior (roof structures, floors) and exterior (roof boarding, pergolas, fences) wooden elements.
Wood protection – 3 in 1 against mildew and wood-destroying insects and fungi
DIRECTIONS FOR USE
Field of application
- roof structures
- roof boarding
10 years or more, with subsequent inspections of protective condition every 2 years
PROPERTIES OF TREATED WOOD
The diluted product soaks into the timber, forming a stench-free, unlayered wood surface. The colourless version does not cause yellowing.
ACCORDANCE WITH EUROPEAN STANDARD EN 49 0600-1:
FB, IP, P, 1, 2, 3, S
DIRECTIONS FOR USE
Mix before use! Remove all bark residues, old paint coats and debris before treatment. For the preservative to be deposited uniformly and evenly across the timber surface, treatment should take place at temperatures of +5 °C to +30 °C. Soaking time will depend on the timber’s moisture content. Wait until the first coat has soaked in completely (about 4-24 hours) before applying the next coat or spray. Once treated, outdoor timbers (use class 3) must be covered with a suitable coating. When using coatings other than Bochemit Estetik, we suggest contacting the coating manufacturer or testing the product on a small piece of timber beforehand.
Watch how easy it is to impregnate older (and other) wooden structures by spraying.
Roofing foil: Do not expose diffusion foil to freshly impregnated timber, otherwise the diffusion foil may lose its effectiveness. Diffusion foil should only be laid once the timber treatment product has dried completely. Drying time will depend on the number of coats applied, the timber’s moisture content and weather conditions, and is usually 4–24 hours after the previous coat.
Certified as effective under EN 46-1, EN 113, EN 73, EN 84 (prevention).
USE CLASS IN ACCORDANCE WITH EN 335
BOCHEMIT CONCENTRATE: WATER DILUTION RATIO
MIN. CONCENTRATE INTAKE
Interior (1, 2)
coat, spray (1–2x)
1:13 - 1:19**
coat, spray (2-3x)
30 g/m2 *
1:6 – 1:9**
* when used with a suitable top coat only (e.g. Bochemit Estetik)
** indicative dilution, achieved intakes may vary depending on the moisture and wood structure